You have selected the AU version of the whole-house Aǹalemma unit, which was designed to fit into the standard plumbing system used in the AU. The AU system uses millimeters as the main unit of measurement, and the whole-house Aǹalemma unit is fitted with the standard 23.4 mm piping (inner diameter). Before placing your order, please confirm with your plumber that the unit will be compatible with your plumbing system.
If you have any questions about the compatibility of your plumbing system with the whole-house Aǹalemma unit, please contact us at info@analemma-water.com.
Installation of the whole-house Aǹalemma unit
A certified plumber is required for the installation of the whole-house Aǹalemma unit.
There are two ways to connect the Aǹalemma unit, depending on the type of plumbing in your home. The two standard methods are press fitting and compression fitting.
If the pipe size in your home differs from the pipe size of the whole-house Aǹalemma unit, your plumber will need to acquire a suitable reducer/adapter. For example, if your installations contain 22 mm piping, you will need a reducer that will connect your 22 mm piping to the standard 23.4 mm piping on the whole-house Aǹalemma unit.
Aǹalemma Water is not responsible for the installation of the whole-house unit.